lisätty Kassa
 

Lehle D. Loop SGoS

Lehle

CB1384

TOIMITUSKULUT

1 kpl jäljellä

Lehle D. Loop SGos is a true bypass looper with two loops that takes inactive effects out of the signal path. The loops work independently of each other. Adjustable buffer is available in all situations if needed and can also be used to boost the signal level of the connected effects. D. Loop can handle and route mono and stereo signals. Input, output, and loop jacks are all stereos.

    Connections:

    Arrow down (right corner): The instrument input for connecting guitar, bass, and other instruments to D. Loop. The signal is routed to output unchanged when the loops are not active. When the buffer and both loops are active, the signal chain is Buffer->Loop A->Loop B->Output.
    Arrow up: Output for the amplifier.
    Loop A (S and R): Send and return for loop A. Connect the effects in between send and return jacks. You can also route the signal from send to an amplifier input if you want to route the signal to multiple amps via D. Loop.
    Loop B (S and R): Send and return for loop B. Connect the effects in between send and return jacks. You can also route the signal from send to an amplifier input if you want to route the signal to multiple amps via D. Loop.
    Buffer: Gain control for built-in buffer. Buffer is active when the LED is blue.
    Midi connection (left corner): With the MIDI connection you can connect the D. Loop with other Lehle SGoS series switchers and get the D. Loop to receive and transmit program change commands. See manual for more information on Midi.
    Footswitches: Three high-quality switches that are virtually indestructible (designed to withstand over one million presses). These switch the loops and the buffer on and off. In basic mode the center switch controls loop A, the right switch controls Loop B, and the left foot switch turns the buffer on and off. In programming mode, the switches can be set to turn on and off different combinations of the loops and buffer. See manual for more information on programming.
    • Power requirements: 2.1 mm 9-20 V DC center negative. 195 mA.
    • True Bypass or buffered (user selectable)
    • Made in Germany

    CLICK HERE TO READ THE MANUAL FOR LEHLE D. LOOP SGOS


    Tuoteryhmät: Signaalin reititys, Lehle

    Kategoria: True Bypass Loopers

    Toimitukset Suomeen

    Lähetys saman päivän aikana