lisätty Kassa

Ilmaiset toimitukset Custom Boards Premium-jäsenille

T-Rex Replicator Tape Echo (available on order)

T-Rex Engineering



T-Rex Replicator Tape Echo is the first real tape echo ever produced that features tap tempo and modulation that can be turned on and off. Changing the tape is easy and quick. Dry signal is kept 100% analog. Two tape heads. Replicator can also be used with line-level devices (keyboards, PA Aux Send, preamps, etc.).

  • Controls and features:
    Master Volume: Sets output volume level. At maximum setting you will get +8 db volume boost.
    Chorus: Sets the depth for the modulation that is activated with the Chorus footswitch. Modulation gets stronger towards 5 o'clock.
    Saturate: Controls the recording level of the tape head. Depending on the level of incoming signal the tape head can be driven to saturation, which is also displayed visually via a LED light. When you set this control just below the level where the LED lights up, you will get the cleanest and strongest repeats with least amount of hiss.
    Delay Level: Sets the mix between dry and effected signal. At 5 o'clock the repeats are as loud as the dry signal.
    Feedback: Sets the number of repeats. At 7 o'clock there is only one repeat. Towards 5 o'clock the repeats will begin to oscillate. You can also control Feedback with an expression pedal. If an expression pedal is connected to the Feedback Input jack, this control will be bypassed.
    Delay Time: Sets the delay length by controlling the speed of the tape motor. Depending on which head(s) is chosen, the delay lengths are:
    Head 1: 250 - 1200 ms
    Head 2: 125 - 600 ms
    You can also control the delay time with an expression pedal. If an expression pedal is attached to the Speed Input jack, this control will be bypassed.
    Kill Dry switch: This switch mutes the dry signal when the switch is pressed down.
    Heads footswitch: This switch rotates through three different options regarding the tape playback heads
    Green light: Head 1 is active. If you use tap tempo, the echo time will be in sync with the tapped tempo.
    Red light: Head 2 is active. If you use tap tempo, the echo time will be half of the tapped tempo.
    Orange light: Both tape heads are active. In this mode you can create rhythmic delays.
    Chorus footswitch: Turns the modulation of repeats on and off.
    Tap footswitch: You can control tap tempo with this footswitch.
  • Power Requirements: 2,1mm 24V DC centre negative power supply. Power supply is provided with the Replicator.
  • Measurements: 23,5 cm (width) x 17,3 cm (depth) x 7,0 cm (height)
  • Weight: 1.9 kg
  • Power requirements: 2.1 mm 24 V DC centre negative. 300 mA. Power supply included.
  • True Bypass
  • Made in Denmark
  • Carry bag included
  • One extra tape cartridge included
  • Four Q-tips included for cleaning the moving parts

Tuoteryhmät: Efektit, T-Rex Engineering

Kategoria: Delay ja Echo

Toimitukset Suomeen

Lähetys saman päivän aikana

Liity Custom Boards Premiumiin ja saa ilmaiset toimitukset EU:n sisällä sekä ensimmäisenä tiedon koulutuksistamme, tarjouksistamme ja uusista artikkeleistamme.