lisätty Kassa

Strymon Iridium Amp Modeler & Impulse Response Cabinet

Strymon

CB2112

Iridium gives you three iconic amplifiers, with a total of nine impulse response speaker cabinets that complement the tonality of the amp. Skip the hassle of lugging around or miking amps. Place Iridium on your pedalboard and send gorgeous stereo amplifier tones, stunningly realistic cabs, and lush room ambience direct to a recording interface or PA system. With Iridium, it’s a snap to dial in a direct tone that will truly inspire and sound great whether you are monitoring through in-ears, floor wedges, reference monitors, or studio headphones.

Sound design:

  • Three amplifier models crafted using Matrix Modeling™, capturing the subtleties and unique tonal qualities of each amp
    • Round Amp – based on* a Fender® Deluxe Reverb®
    • Chime Amp – based on* the Brilliant channel of a Vox® AC30
    • Punch Amp – based on* a Marshall® Plexi (Super Lead model number 1959)
  • Nine Impulse Response speaker cabinets, 24bit / 96kHz 500ms
    Stereo (three per amp type), pre-loaded with a curated set of IRs:
    • Deluxe Reverb 1×12″ by OwnHammer
    • Blues Junior® 1×12″ by CabIR
    • Vibrolux® 2×10″ by CabIR
    • AC30 2×12″AlNiCo by OwnHammer
    • 1×12″ AlNiCo by Celestion®
    • Mesa® 4×12″ by Valhallir
    • GNR 4×12″ by OwnHammer
    • 2×12″ Vintage 30 by Celestion
    • Marshall® 8×12″AlNiCo by CabIR
  • Load your own impulse responses using Strymon Impulse Manager software
  • Hybrid IR/algorithmic Room control with selectable small, medium, and
    large rooms
  • Simple, responsive amp-style controls for Drive, Level, Bass, Middle,
    and Treble
  • Premium stereo high impedance discrete JFET analog front end with
    up to 22dB of pure analog gain

Ins, Outs, and Switches:

  • Stereo Input (requires TRS adapter cable)
  • Stereo Output
  • Operates at instrument and Line Level input sources
  • Discrete transistor headphone amplifier
  • Expression pedal input provides seamless morphing between knob positions (Expression mode), or smooth pre/post volume control with logarithmic taper (Volume mode)
  • USB jack for connecting to Strymon Impulse Manager software
    to add and edit your own speaker cabinet IRs
  • Compatible with Strymon MultiSwitch Plus for remote selection of up to 4 presets
  • Full featured MIDI control accessible via EXP Jack for remote parameter control and access to 300 preset locations (requires Strymon MIDI EXP cable or MIDI to TRS interface)

Audio Quality:

  • Ultra-low noise, high performance 24-bit 96kHz A/D and D/A
    converters provide uncompromising audio quality
  • Super high performance SHARC and ARM co-processors
  • 32-bit floating point processing

Specs:

  • Transparent Analog Buffered Bypass
  • Strong and lightweight anodized black aluminum chassis
  • 9V DC power supply included
  • Power requirements: maximum 9 volts DC center-negative, with a minimum of 500mA of current. (The current consumption on Iridium can vary quite a bit depending on whether or not the pedal is being used with headphones.  Iridium requires 9V DC center-negative power and between 300-500mA of current depending on usage:
    • If you will not be using the headphone output on Iridium, we recommend providing at least 300mA of current.
    • If you are using the headphone output on Iridium, we recommend providing at least 500mA of current as Iridium requires additional current to power the internal headphone amplifier.

    NOTE:  The factory power supply that is included with Iridium provides enough power to cover both use cases above.

  • Dimensions:
    • 4.5″ deep x 4″ wide x 1.75″ tall
    • 11.4 cm deep x 10.2 cm wide x 4.4 cm tall
  • Designed and built in the USA

Toimitukset Suomeen

Lähetys saman päivän aikana