lisätty Kassa

Ilmaiset toimitukset Custom Boards Premium-jäsenille

Lehle Julian Parametric Boost

Lehle

CB1387

TOIMITUSKULUT

1 Tuote jäljellä

Lehle Julian gives you volume boost with parametric control over mid and high frequencies. Designed for boosting a tube amp. Julian also works as a buffer if desired.
    Controls:
    Gain: Sets boost level. Range +/-15 db. Unity gain is at 12 o'clock.
    Freq: Chooses which frequencies are boosted (or cut). Range 250 Hz - 5 kHz.
    Boost:
    Sets level for the frequency selected by Freq control. Range +/-15 db.
    Treble:
    Defines the amount of high frequencies in the signal. At 7 o'clock the sound is dark, gets brighter towards 5 o'clock.
    Bypass switch: Lehle's indestructible bypass switch turns the pedal on and off.
    Hz/Lz switch: Julian's input impedance is 1 MOhm by default, which is the same as in most tube amps. When this switch is pressed down, Julian's input impedance lowers to 10 kOhm, which is the same as in many vintage boosters and fuzzes. Lower impedance had a big impact on their sound.
    TS/TB switch: Chooses bypass mode. When pressed down, Julian is in true bypass mode. This works great for small pedalboards with short cable runs, or if you run a fuzz pedal after Julian. When switch is up, Julian is in buffered bypass mode. This mode is great for bigger pedalboards with more cable in between the guitar and amp.ᅠ
    • Power requirements: 2.1 mm 9-20 V DC or AC power supply, polarity does not matter. Also works with 9 V battery. 38 mA.
    • True Bypass or buffered bypass (user selectable)
    • Made in Germany

    CLICK HERE TO READ THE MANUAL


    Tuoteryhmät: Efektit, Lehle

    Kategoria: Boosterit

    Toimitukset Suomeen

    Lähetys saman päivän aikana

    Liity Custom Boards Premiumiin ja saa ilmaiset toimitukset EU:n sisällä sekä ensimmäisenä tiedon koulutuksistamme, tarjouksistamme ja uusista artikkeleistamme.

    LIITY CUSTOM BOARDS PREMIUMIIN