lisätty Kassa

Ilmaiset toimitukset Custom Boards Premium-jäsenille

Alexander Pedals F-13 Neo Flanger

Alexander Pedals

CB1814

TOIMITUSKULUT

2 Tuotetta jäljellä

Controls:

Controls in parentheses () are accessed by holding down the Select button and turning the indicated knob.

Rate:  Controls the rate of the low-frequency oscillator (LFO) for the flanger, from glacial to space invaders.  Controls the input sensitivity in Dyna mode.

(ALT1):  Controls the sweep offset (manual) in Auto mode, the pattern select in Step mode, the envelope speed in Dyna mode, or the delay time in Echo mode.

Depth:  Controls the maximum LFO sweep in Auto, Step, and Echo modes. In Dynamic mode, this controls whether the flanger sweeps down (less than noon) or up (greater than noon) based on the input signal.

(ALT2): Controls the delay repeats in Echo mode

Mix:  Controls the blend between the dry and flanged signal.  Equal mix is at 12 o'clock.

(Level):  Controls the overall output level of the pedal, from -20dB to +10dB.  Unity gain is near 1 o'clock.

Regen:  Adjusts the amount of flanged signal fed back into the modulation.  Zero feedback is at noon, clockwise increases the positive feedback for a standard flanger sound.  Twist this knob counter-clockwise for negative feedback and a unique "inside out" flange.

 

Select Button - tap to choose a new effect mode:

Auto:  Traditional flanging is found here.  The LFO of the F.13 Neo is actually a "hypertriangular" waveform, so that the flanger spends more time in the interesting portions of the sweep.  The ALT1 knob controls the sweep offset, sometimes referred to as "manual."

Hint:  Set the Rate control at zero for "filter matrix" style manual flanging.  The Depth knob controls the flange position.

Step:  The flanger LFO is forced to "step" to distinct values for transforming robot sounds.  The F.13 Neo has eight patterns, selected by the ALT1 control: Up, Down, Up+Down, Square, Whip, Two+Three, UpUpDnDn, and Random.

F13-N Waves.png

Dyna:  This one is kind of unusual, even for us!  The flanger delay time is set by the volume of the input signal.  The Rate knob adjusts the sensitivity, to allow for different pickups or effects before the F.13 Neo.  The Depth knob controls which direction the flanger will sweep when it hears the input signal. The F.13 Neo now features an envelope speed control on the ALT1 knob.  Set this to the fastest speed for a more excentrifugal experienz. Don't say we didn't warn you.

Echo:  This one is for all you radio friendly unit shifters out there looking to become the genius of love.  We couple a fierce flanger with an exceptional echo for a very interesting take on time delay effects.  The ALT1 and ALT2 knobs control the delay time and feedback of the echo, while the Rate, Depth, and Regen knobs control the flanger side.  You can set either side to a very short delay for maximum comb filtering, or you can create spiraling soundscapes.  

Bypass Switching:

The F.13 Neo features a buffered bypass using a soft-touch footswitch.  The dry signal path is digital, to maintain the precise time and phase alignment necessary for ultimate flanging.  The bypass signal is 100% analog.

Configuration:

To configure, power on while holding the center Select button and release when the program LEDs start to flash.

Tap the Select button to choose Expression (upper LED green,) Foot Switch (upper LED orange,) or MIDI (upper LED red.)

Turn the Mix knob to select the Foot Switch Ramp speed - Lower LED green slow, lower LED orange medium, lower LED red fast.

Turn the Tweak knob to set the main LED brightness.

If you wish to assign the F.13 Neo's MIDI channel, simply send a program change message from your controller on the correct channel while the pedal is in configuration mode.  Hold the Select button to save the pedal settings.

The F.13 Neo MIDI port requires the use of either a MIDI converter box such as the Disaster Area / Chase Bliss MIDIBox or a MIDI controller that supports 1/4" devices such as the Disaster Area Gen3 series.  The F.13 Neo defaults to using MIDI Channel 1.

  • Power requirements: 2.1 mm 9V DC centre negative power supply. 80 mA.
  • Made in USA.

Toimitukset Suomeen

Lähetys saman päivän aikana

Liity Custom Boards Premiumiin ja saa ilmaiset toimitukset EU:n sisällä sekä ensimmäisenä tiedon koulutuksistamme, tarjouksistamme ja uusista artikkeleistamme.

LIITY CUSTOM BOARDS PREMIUMIIN