CB2090
Tulossa €16.90
The Pro Pocket Spike Tape Stack Fluorescent is perfect for highly visible markings and labelings at events. The 5 vibrant colors glow under exposure to UV light. The tape is 12 mm wide and 5.5 m long, it can be removed residue-free for about 3 weeks and provides very high adhesive strength. Printable with: flexo inks, markers, pens, and pencils.
You can mark some critical jacks in your signal chain with Pro Pocket Spike Stack Fluorescent Tape, which you can also use to mark your settings.
Make sure you use the same colors for the opposite ends of one cable. There are five different Pro Gaff colors available, but you can also use combinations of two or three tapes for additional options.
We use the following abbreviations:GTR – guitar cable
AMP – amp cable going to the amp’s input
FS – footswitch for channel switching etc.
IP – input; the board’s input
OP – output; the board’s output
S – send; FX loop send
R – return; FX loop return
SPK – speaker cable
WRL – wireless; cable or coming from the wireless system
You can also come up with similar abbreviations that work for your requirements. You can also draw arrows to mark the signal flow of critical cables. The most important thing to remember is that you use the same colors and abbreviations on both ends of the same cable and that you keep your markings logical and legible.
Marking your settings is important, especially if you’re forced to go on in a hurry or on a dark stage. You only have to take a few looks to be sure your pedalboard’s effects are adjusted correctly.
Weighing your pedalboard – packed inside its case – on suitable scales will give you an exact figure for flying to gigs. You can use the same fluorescent Pro Gaff tape to mark the weight clearly on the side of your case (or gig bag).
Tuoteryhmät: Custom Boards Suosittelee, Viimeistely
Kategoria: Värikoodaus, Custom Boards suosittelee